Enquire Now!

If you require any information such as product details or quotes please fill out the form below and we will get back to you as soon as we can.

    Fixing a Garage Door Opener That Won’t Close

    Garage door opener problems can be caused by a variety of factors, but for most of them, there is an easy fix that won’t require garage door repairs in Perth.

    You might need to adjust the door’s alignment with the motor and track or replace a broken cable or torsion spring. There is also the possibility that you have a malfunctioning safety sensor.

    The garage door is a major component of a home, but it is also among the most dangerous. In the event of a malfunction, it can compromise your safety.

    When something goes wrong with a garage door mechanism or sensors, it can cause serious injury because garage doors are often heavy and require a lot of force to operate.

    In order to protect family members and property, it is best to seek professional garage door repairs in Perth sooner rather than later.

    How to Fix a Garage Door That Won’t Close

    There are some simple things you can do at home to assess the problem and apply a fix when your garage door won’t open or close. Go through these five tips and call for garage door repairs in Perth if these solutions fail to address the problem:

    1. Evaluate The Situation
      If your garage door won’t close, the first thing you should do is do a visual check. Make sure nothing is blocking the safety sensors under the door.
    2. Inspect the Safety Sensor
      After that, if there isn’t anything physically blocking the door and sensors, you can check them to make sure they are clean and properly positioned. Because the garage is a dusty place, the sensors are susceptible to dirt and grime. Even cobwebs can cover the lens and prevent it from working correctly.
    3. Take a Look At The Wall Station
      You might think a dead wall switch is the end of your garage door opener, but it’s usually a solvable power issue. Because the wall switch is directly connected to the opener, reprogramming or troubleshooting signal issues will not be necessary. The likely cause of a broken wall switch is either the switch or the wiring. Switches typically have two wires. Disconnect both wires from the switch and carefully touch them together. If your garage door opener responds, it might be the switch. If nothing happens, you’ll need new wires.
    1. Activate the Manual Release Cord
      Using the manual release cord is our final DIY fix. It is found on the garage door opener, and it should be able to release the opener from the door so that you can lower the garage door manually. The bottom section of the garage door should have a handle. Using this handle, you can lower the door once it has been released from the opener.
    2. Consult a Professional
      Lastly, in case everything else fails, contact a garage door professional. There are certain things that might be the cause of the problem that you cannot resolve on your own. When you need help with binding issues or a garage door tune-up, a professional will be able to assist.

    When To Call For Garage Door Repairs In Perth

    Although this is a fairly comprehensive guide, it isn’t exhaustive. You need to call in the professionals if you have tried everything to resolve the problem to no avail and the door still won’t close.

    Garage door servicing, installation, maintenance, and repair are the core services of All Time Garage Doors. All types of garage doors and their components will be handled by our team of experts. Having gone through an extensive training program, our technicians are familiar with all techniques for garage door repairs in Perth. We are also available for emergency garage door repair 24/7 for your safety. Call us on 0467 051 890.